iCollar OS v1.8.0

Connectivity

SoftAP: Tracker-Test-Setup

Home Wi-Fi: UP Private Wifi RSSI -14 IP 10.192.119.123

Trusted anchor: YES | GPS sleep: ANCHORED

Chip temp (die): 53.3C

Internal ESP32 sensor — often 10–25C above what the board feels. SoftAP/BLE mid‑40s–50s is normal. Alert only above ~70C die.

Cloud API: (not set) | csv=0B old=0B

Battery

State: CHARGING

Source: USB-C

Status: CHARGING (USB-C) - MakerBattery via charge IC

Capacity: 41%

Model: ~1000 mAh | draw ~140 mA | charge ~320 mA

Runtime not learned yet — one full unplug→empty cycle trains capacity.

Session: out 356 min | charge 5 min

Voltage sense weak (A0=0.404V) — SoC from runtime/charge model. For best accuracy: 1:2 divider BAT→A0, then Calibrate Full on charger.

Mark Empty sets 0% then shows CHARGING if USB/wireless is detected. Wireless pad: press ON WIRELESS PAD so Source isn’t stuck on Battery pack. Runtime learning needs a real ≥4h discharge.

Telemetry

Satellites: 3

GPS chars: 52496 | fails: 2

No GPS fix - check wiring D7<-GPS TX, D6->GPS RX

Geofence

Status: POLYGON SET - WAITING FOR GPS FIX

Mode: POLYGON (4 points)

Home: 37.488520, -106.260014

Draw a custom shape on Map (tap corners → Save Polygon). Circle radius still available as fallback.

Hardware Controller